a
b
Seite / page
10
KDF 700E / 800E
Operating manual
7.2 Mounting the saw blade
The saw blade should always be mounted to the loor saw by hexa
-
gon screws. The blade can be mounted either to the right or left side
of the loor saw. The Screw left from the belt guard is a lefthand
screw.
outerlange
hexagonal screw
a
b
Make sure that the direction arrow on the blade and on the belt guard
are pointing in the same direction.
Saw blades which show optical damage such as cracks or that due
heat have become blue or lost segments should never be used.
7.3 Mounting the blade guard/cover
Before commencing a job one should have both the blade guard and
the cover of the blade free lange on tightened with the bolt.
Should a cut lead up to an obstacle (such as a wall), one can remove
the front part of the blade guard which makes it possible to cut up to
the desired point.
One should only remove the front part of the blade guard when it is
no longer possible to cut with it. When cutting without the front part
pay close attention to avoid any accident. Whenever doing any moun-
ting or dismounting on the loor saw be sure to have it switched off
and the blade is not running.
Floor saw
