KERN-DEUDIAM DK 32, Руководство по эксплуатации

Страница: 5 / 20

Manual
03/2015
5. Instructions of safety
5.1 Basic terms
Before mounting the motor on a
support and beginning the work,
please attentively read the safety
instructions and keep them for further
reference.
5.2 Organization of workplace
The drill work has to be approved by the
supervisor of the building site. Carrying out this
work can affect building statics considerably.
The workplace has to be constantly well-lit. Take
care of good ventilation of the workplace. Keep
thr workplace clean and tidy. The disorder on a
workplace can lead to accidents. In a work zone
there shouldn't be any foreign objects, which
could lead to injuries of the service personnel or
the third parties. In a work zone there shouldn't
be any foreign persons, especially children.
Make sure that neither the third parties nor any
surrounding objects won't suffer in case any
parts of the drill system come off.
Take measures that the core which is forming as
a result of drilling, doesn’t fall uncontrollably and
injures the third parties or objects. The openings
formed as a result of drilling have to be
accurately designated to prevent people falling.
Don't touch the drilling (diamond) tool.
Use means of personal safety:
At formation of dust (at "dry" drilling) use a
protective respiratory mask.
Don't wear wide clothes and jewellery, because
they can get into moving parts of the drilling
system.
In case you have long hair, use a
special hair-net. Make sure that your working
footwear doesn't slide.
Lay electro cables and water hoses to avoid the
danger of people falling.
Hold all connections (hoses, cables) as far away
from rotating parts as possible.
ATTENTION: Make sure that in places of drilling
no hidden electro - water - and gas-connections
are present, for example by means of the special
metal detector.
Don't work with a drill stand on a
step-ladder.
5.3 General measures of safety
Use the original additional KERN-
DEUDIAM equipment which is
described in this manual. The use
of
equipment from other
manufacturers can be dangerous
for you.
A hand crank has to be free from oil and fat.
Avoid any overloads of your system. Work in the
set modes - it is economically and safe.
Store the parts of the system which are not used
in a safe place. This room shouldn't be
accessible to the third parties, especially
children.
Keep your tool clean and in good working order.
That will positively affect its efficiency. Before
each use of the system, check that it isn't
damaged and that all functions of the system are
in order. In case any damaged parts are
detected, safely replace them by a new one.
ATTENTION: Don't use the damaged tool!
Have the repair of the tool made only by KERN-
DEUDIAM enterprise or by its authorized
partners. In case of a non-professional repair of
the equipment, your life can be in danger. Avoid
slime hit your skin. Materials hazardous to health
(for example, asbestos) are forbidden to drill.
5.3.1 Mechanical part
Follow the instructions for
maintenance. Observe the rules of
lubrication and replacement of the
tool.
.
Make sure that the motor is safely and correctly
fixed on a drill stand.
Keep a distance to the rotating
drilling crown.
During operation with a drill bit or
during its changeover etc., make
sure, that the plug has been pulled
out from the socket.
5.3.2 Electrical part
When using electrical instruments
there is a danger of electrical
shock. Avoid contact with the
grounded objects, such as pipes,
radiators, furnaces, refrigerators, etc.
Make sure that the voltage of the socket
corresponds to the data given on the table on the
plate of the drilling motor.