NXT-1RE/-3RE/-5RE Exit Reader
Installation Guide
Page 5 of 6
P/N: 01250-001 Rev. C
2.
Highlight the bus into which both the NXT-R (In) reader and the NXT-RE (Out) reader are wired.
3.
The
icon is now displayed on the ribbon bar. Click this icon and an Exit Reader is added to the same
bus. You will receive an alert message prompting you to verify the correct reader type is being used. Click Yes to this
prompt.
4.
The additional reader will automatically be configured as the out reader for that bus.
5.
Once the reader appears in the hardware tree, highlight it, then within the properties give the NXT exit reader a
descriptive name.
