19
Notes for camera:
• If the battery is empty please recharge it using the charging cable.
• Always keep the weatherproof cover fitted regardless of conditions.
CAMERA LED INDICATOR
STATUS
Red on
Charging when power is off
Off
Power off (disconnect with cigarette lighter)/Finish charging
Green on
Power is on
Yellow on
Charging while power is on
Notes for receiver:
• A full charge will take about 2.5 hours, which can power the receiver for about 2 hours continuously.
• You are recommended to have the battery fully charged before its first installation to optimize its life.
• Do not burn or disassemble the Li-battery.
• Do not short-circuit the battery as it may cause fire or electric shock.
RECEIVER LED INDICATOR
STATUS
Red on
Charging while power is off
Off
Power off (disconnect with cigarette lighter)/Finish charging
Green on
Power is on
Using the Camera
1. Before using make sure the camera is fully charged. Adjust the camera Power ON/OFF/channel button to power on
your camera (set channel 1)
Camera
2. Mount the Magnetic Camera, and then adjust it to a suitable angle.
Be sure that there is the same channel on camera and on LCD monitor
