2
228-1159
062599
KEPCO, INC.
!"!
131-38 SANFORD AVENUE
!"
FLUSHING, NY. 11352 U.S.A.
!!"
TEL (718) 461-7000
!!"!
FAX (718) 767-1102
!!
http://www.kepcopower.com
"!
email: [email protected]
DIELECTRIC STRENGTH:
Between input and output: 2KV a-c for one minute.
Between input and output with Y-capacitor removed: 3.0KV a-c for one minute.
Between input and case (ground): 2.0KV a-c for one minute.
INSULATION RESISTANCE:
Between input and ground, output and ground, input and output;
100 Megohms min. (500V d-c).
LEAKAGE CURRENT
(UL method, 120V a-c, 50-60Hz, single terminal connection): 0.5 mA maximum.
(VDE method, 240V a-c, two terminal connection): 0.75 mA maximum.
SAFETY:
UL 1950 recognized (ambient temperature 40° C maximum); CSA E.B. 1402C Level 3 Certified (FAW 48-2.8K Level 1 Certified); CSA
22.2 No. 234 (M90) Level 3 (FAW 48-2.8K Level 1 Certified [ambient temperature 50° C maximum], IEC 950 Approved by TÜV Rheinland (based
on EN 60950/09.87, ambient temperature 50° C max.) - cover removed.
(+) SENSE, (–) SENSE:
These terminals are provided to compensate for voltage drops in the load connecting wires. The Sense terminals must
be connected to their respective (+) and (–) output terminals, either at the load or at the Power Supply output terminals. The connection ensures
the most accurate error tracking. Error compensation in the connecting wires is up to 0.25 Volts for the FAW 5-30K model, and up to 0.4 Volts for
all other models.
“POWER OK” SIGNAL OUTPUT:
The unit supplies a “POWER OK” logic 1 signal at CP51 (see Figure 2 and Figure 4, View “A”).
CONNECTOR TYPES:
Refer to the Mechanical Outline Drawing. The mating connector for CP51 is a Panduit, P/N CT10F22-2: Cover, P/N
TC100F-2.
CONNECTOR KIT:
Kepco furnishes an optional connector kit with the specified connector listed above. The kit may be ordered under Kepco
Model Kit P/N 518-0029. The connector is provided with 1 meter length leads for trimming to desired lengths.
EMI:
Designed to meet FCC Class B (100-120V a-c) and VDE 0871 Class B (220-240V a-c).
VIBRATION:
(non-operating, one hour on each one of the three axes):
5-10 Hz, 10 mm amplitude.
10-55 Hz, 2g acceleration.
SHOCK:
(non-operating, one-half sinusoidal pulse, three shocks to each axis):
Acceleration: 20g
Duration: 11ms +5ms
OPERATING TEMPERATURE:
0 - 71° C (see Figure 1).
STORAGE TEMPERATURE:
–40
o
C to +75
o
C.
OPERATING AND STORAGE RELATIVE HUMIDITY:
up to 95% (wet bulb temp. <35
o
C non-condensing).
MOUNTING SCREW:
No. 4-40 UNC Thread (see Figure 4)
MAXIMUM SCREW PENETRATION:
0.197 in. (5mm) max.
WEIGHT:
2.65 lbs. (1.2Kg max.), 4.41 lbs. (2.0 Kg max. with cover).
DIMENSIONS:
3.74 in. (95mm) H x 2.01 in. (51mm) W x 7.87 in. (200 mm) L
CASE DIMENSIONS:
3.74 in. (95mm) H x 2.09 in. (53mm) W x 7.87 in. (200 mm) L
FRAME MATERIAL:
Aluminum
FUSE:
Quick acting 6.3A, 250V; (5.2 x 20mm), San-O P/N EQ6.3A; Kepco P/N 541-0113.
WARRANTY:
1 year.
