KEPCO BOP 5-20DL, Руководство оператора

Страница: 10 / 70

1-2
BOP 5-20DL 081915
TABLE 1-1. GENERAL SPECIFICATIONS
SPECIFICATION RATING/DESCRIPTION CONDITION/COMMENT
A-C Input Voltage Nominal 104V / 115V / 208V / 230V Internal setting, see Figure 2-3
Range 95-113V / 105-125V / 190-226V / 210-250V
Brown-out 93V / 103V / 186V / 206V
Frequency 50 / 60 Hz nominal, ±3Hz range
A-C Input Current 11.0A Nominal output power,
sourcing, @115V/ 60Hz
Active Input power 1050W Nominal output power,
sourcing, @115V/ 60Hz
Power Factor 0.83 Nominal output power,
sourcing, @115V/ 60Hz
Input Leakage Current
(through earth-ground
connection) 0.1mA rms 115V/ 60Hz
Insulation Coordination Input Installation Cat. 2, Overvoltage Cat. 2,
Pollution Deg. 2
For TN or TT power systems
Output Installation Cat. 2, Overvoltage Cat. 2,
Pollution Deg. 2
Max. 500V between COMMON
output terminal and chassis
Topology Linear Half bridge (AB Class)
Mode of operation Voltage Mode with
Current Limit and Voltage Limit
OR
Current Mode with
Voltage Limit and Current Limit
Mode of operation selectable
by front panel switch.
DC Transfer Factor
(Closed Loop Gain) Voltage in
Voltage mode
-0.5V/V ±0.5%, with default preamplifier For the default “inverting”
configuration.
Current in
Current mode
-2A/V ±0.1% with or without default pream-
plifier, after recalibration/readjustment
See Figures 3-9 and 3-18 for
“non-inverting” configurations in
voltage/current mode.
Preamplifier’s amplification
factor can be changed by
modifying connections and
adding resistors at rear
programming connector.
DC Transfer Factor is not
adjustable for voltage in voltage
mode nor for voltage and
current limits.
The DC Transfer Factor in
current mode is adjustable ±5%
by A3R316 (see PAR. 4.2.8).
Voltage in
Voltage limit
+0.55V/V ±2% for positive limit
-0.55V/V ±2% for negative limit
Current in
Current limit
+2.2A/V ±2% for positive limit
-2.2A/V ±2% for negative limit