Printing position
Notes
The mechanical form stopper is adjustable in the range 26.5
to 36.5 mm
(
1.04" to 1.44")
1.
The TOF and BOF sensors are fixed and cannot be
adjusted.
2.
3. After slip paper is set at the mechanical form stopper, the
top margin can be shortened up to 21.2 mm (.83"
)
by
feeding the paper backwards (ejection feeding).
4.
When ejection feeding is not performed after printing,
printing can be performed up to the position at which the
paper edge is no longer held by the paper feed roller (13.8
mm
) (
.54"
)
from the paper edge).
When ejection feeding is performed after printing, the paper
can be fed forward up to 11.8 mm
(
.46
")
(28 dots) after the
bottom edge is detected.
5.
Reference Information 4-5
Reverse Paper Feed
ò
Forward Paper Feed
ñ
