Keo Mini Central K 208, Руководство пользователя

Страница: 50 / 64

50
Divert if it does not answer or if it is busy
Incoming calls to your extension will only be
transferred to the programmed extension when it
is busy or it does not answer.
Programming:
Press + Extension (destination).
Unprogramming:
Press .
Note: This program will be lost during power
failure.
Do Not Disturb
You may block the reception of incoming calls to
your extension. Your extension will no longer
receive calls as of the time you program the “Do
Not Disturb” function.
Programming:
Press .
Unprogramming:
Simply remove the handset from the cradle.
Note: This program will be lost during power
failure.
Programming
If your extension has Hotline you must press
before any command for all the programs
described below.
Command to switch to general program
Changing Programming Password
In the programmer extension, in programming
mode, press
+ YYYY + and wait for the
confirmation tone.
How to switch to
programming mode:
In the Programmer extension, press:
+ XXXX
Where: XXXX is the
programming password
(0000 is the factory password)