background image

Use only dry pot holders.

Moist or damp pot holders on hot surfaces may result in burns from steam.  Do not let pot holders 

touch the elements on the appliance.  Do not use a towel or other bulky cloth in place of a pot holder.

Do not cook on broken cooktop.

If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and 

create a risk of electric shock.  Contact an authorized service center or KENYON Customer Care 

immediately at (860) 664-4906.

Clean cooktop with caution.

Do not clean the cooktop while it is still hot.  If a wet sponge or cloth is used to wipe spills on a hot 

cooking surface, be careful to avoid steam burns.  Some cleaners produce noxious fumes if applied to 

a hot surface.  Read the cleaner label for details prior to using.

Use proper pan size.

This appliance is equipped with one or more surface units of different size.  Select cookware 

having flat bottoms large enough to cover the surface unit heating element.  The use of undersized 

utensils will expose a portion of the heating element to direct contact and may result in ignition of 

clothing.  Proper relationship of cookware to burner size will also improve efficiency. 

Never leave surface units unattended at high heat settings.

Boilover may cause smoking and greasy spillovers may ignite.

Glazed cooking utensils

Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable 

for range-tip service without breaking due to sudden change in temperature.

 

Utensil handles should be turned inward and not extend over adjacent surface units.

To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional 

contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and 

does not extend over adjacent surface units.

Do not use aluminum foil on the surface of the cooktop.

Cookware should always be dry.

Do not heat cookware with excess water droplets on the outside of the pan.  The droplets may begin 

to boil and splatter.  

Do not touch surface units or areas near units.

Surface units may be hot even though they are dark in color.  Areas near surface may become hot 

enough to cause burns.  During and after use, do not touch, or let clothing or other flammable 

materials contact surface units or areas near units until they have had sufficient time to cool.  Among 

these areas are the heating elements and surrounding glass surface.

DO NOT DISCARD THESE INSTRUCTIONS, KEEP THEM 

WITH THE KENYON COOKTOP FOR FUTURE REFERENCE.

2

Содержание Lite-Touch Q



















Отзывы: