5
Fig. 2 – Cutout Dimensions
(3)
If Cook Top will be “boxed in” by existing
structures:
•
Cut 2” x 4” (50mm x 100mm) opening for
combustion air anywhere in the surrounding
enclosure
•
Cut 2” (50 mm) diameter hole for Vent Hose
where shown
(2)
FRONT
(OPERATOR SIDE)
12 1/2"
317.5mm
13 13 1/8"
333mm
(1)
Use 1/2” (13mm) diameter
drill or router bit for corners
(1)
If Cook Top will be “boxed in” you must
provide at least 8 square inches of opening for
combustion air
(2)
Hole for Vent Hose
at least 2” diameter
(3)
Bottom Pan
(4)
Vent
Hose
Route
Fig. 3 – Installing Cook Top into Counter
3 ¾”
(95mm)
