background image

For future reference, please record the serial number of your

cooktop here:                                            

STEP #2

Check the Electrical Supply Requirements

This product must be installed in accordance with national, state and local electric codes.  The 

following table provides the correct voltage, amperage and frequency that must be supplied to the 

cooktop.

  

 

The supply must be from an individual grounded circuit that is protected by a circuit breaker and 

rated per the specifications for the various models as shown in the table above.

 

 

 

 

Max Connected               Required Power 

             Minimum

Kenyon Part #    Model # 

       Load

 

 

       

Supply Input

 

 

Wire Size

B41540  

  Med2QTCP  2600 Watts 

 

120VAC/22A/50/60Hz   

#12 AWG

B41549  

  Med2QTCP  3000 Watts 

 

208VAC/14.5A/50/60Hz  

#12 AWG

B41541  

  Med2QTCP  3000 Watts 

 

240VAC/12.5A/50/60Hz  

#12 AWG

B41540L              Med2QTCL  2600 Watts 

 

120VAC/22A/50/60Hz   

#12 AWG

B41549L 

  Med2QTCL  3000 Watts 

 

208VAC/14.5A/50/60Hz  

#12 AWG

B41541L 

  Med2QTCL  3000 Watts 

 

240VAC/12.5A/50/60Hz  

#12 AWG

B41575  

  Med2QTCTP  2400 Watts 

 

120VAC/20A/50/60Hz   

#12 AWG

B41579  

  Med2QTCTP  2400 Watts 

 

208VAC/11.5A/50/60Hz  

#12 AWG 

B41576  

  Med2QTCTP  2400 Watts 

 

240VAC/10A/50/60Hz   

#12 AWG 

B41575L 

  Med2QTCTL  2400 Watts 

 

120VAC/20A/50/60Hz   

#12 AWG 

B41579L    

  Med2QTCTL  2400 Watts 

 

208VAC/11.5A/50/60Hz  

#12 AWG 

B41576L 

  Med2QTCTL  2400 Watts 

 

240VAC/10A/50/60Hz   

#12 AWG

STEP #3

Countertop Preparation

Please read this section prior to making cutout for cooktop.

It is important to plan ahead for installation of the cooktop, keeping the following dimensions in 

mind (please refer to Figure A).

 

   

Warning:  If the electric power supply does not meet the product 

specifications, consult with a licensed electrician before proceeding 

with installation.

!

6

Содержание 120 V


















Отзывы: