Kenworth SmartWheel KM816010, Руководство по устранению неисправностей

Страница: 36 / 45

(01/02) KM816010 Page 35 of 44
MAINTENANCE MANUAL
Kenworth SmartWheel Troubleshooting Guide
16
E. Headlight Flash Does Not Work
E2. Symptom: Headlights do not flash on with SmartWheel switch.
E2-1. Possible cause: Problem in circuit R5NO.
E3. Symptom: Headlights do not blink off with SmartWheel switch.
E3-1. Possible cause: Problem with multiplex control system.
NOTE: If vehicle is equipped with Daytime Running Lights, the headlights will not blink off completely with the Smart-
Wheel. They will change to their daytime mode when the headlamp flash button is pressed.
Check Result What To Do Next
E2-1A
Unplug the 8 way connector from the
electronics module.
Check continuity of ckt R5NO from
pin 5 of the connector to dash head-
lamp switch. Ckt has continuity. Go to E1-1 .
No continuity. There is a break in the circuit
between the module and the dash
switch. Trace ckt R5NO.
Check Result What To Do Next
E3-1A
Press Smartwheel head-lamp flash
switch. Listen for relay click in power
distribution box. Click heard. Headlamp relay may be faulty.
Go to
E1-4 .
No click. Go to A1.