Kenworth SmartWheel KM816010, Руководство по устранению неисправностей

Страница: 16 / 45

(01/02) KM816010 Page 15 of 44
MAINTENANCE MANUAL
Kenworth SmartWheel Troubleshooting Guide
16
C. Engine Retarder Does Not Work
C1. Symptom: Engine retarder will not turn on (1994 Cummins only).
C1-1. Possible cause: No power or ground to retarder circuit.
C1-2. Possible cause: Problem in retarder circuits C96JH or C98JF.
Check Result What To Do Next
C1-1A
Engine retarder (ENG RTD) circuit
breaker or fuse in cab power distri-
bution box. Circuit breaker or fuse OK.
No continuity.
Go to C1-1B .
Determine cause for fuse to blow
(shorted wire, etc.).
Replace circuit breaker or fuse. If
retarder still does not work, go to
C1-1B .
C1-1B
Continuity in ground circuit for
retarder relays (ckt C97CS) from
relay coil to cab ground. Connector OK, continuity to cab
ground. Go to C1-2 .
Connection loose, broken, corroded. Repair or replace connector(s),
tighten ground stud.
Check Result What To Do Next
C1-2A
Retarder wiring/ connections
leading to engine brake solenoids
(ckts C96JH and C98JF). Use multi-
plex steering wheel Select engine
wiring diagram.
Wires OK, connectors clean and
tight. Go to C1-3.
Wires broken, frayed, or connectors
loose, damaged, corroded. Repair or replace wires and/or con-
nectors.