Kenwood XXV-05V Скачать руководство пользователя страница 109

Страница: 109 / 116

English 109

No sound can be heard, or the volume is low.

• Attenuator is turned on.
• The fader or balance settings are set all the way to

one side.

• The input/output wires or wiring harness are

connected incorrectly.

The sound quality is poor or distorted.

• One of the speaker wires is being pinched by a

screw in the car.

• The speakers are not wired correctly.

Radio reception is poor.

• The car antenna is not extended.
• The antenna control wire is not connected.

The memory is erased when the ignition is turned off.

• The battery wire has not been connected to the

proper terminal.

• The ignition and battery wire are incorrectly

connected.

The sound/picture skips on a DVD/VCD/CD.

• The disc is scratched or dirty.

A track will not play.

• Random play has been selected.

A VCD cannot be played using menus.

• The VCD disc being played is not compatible with

P.B.C.

The subtitle is not displayed.

• The DVD disc being played does not contain the

recording of subtitles.

The voice (or subtitle) language cannot be changed.

• The DVD disc being played does not contain the

recording of more than one audio (or subtitle)
language.

• Turn off Attenuator.
• Reset the fader and/or balance settings.

• Reconnect the input/output wires or the wiring harness

correctly. See the section on <Connections> (see page 98).

• Check the speaker wiring.

• Reconnect the speaker wires so that each output terminal

is connected to a different speaker.

• Pull the antenna out all the way.
• Connect the wire correctly, referring to the section on

<Connections> (see page 98).

• Connect the wire correctly, referring to the section on

<Connections> (see page 98).

• Connect the wire correctly, referring to the section on

<Connections> (see page 98).

• Clean the disc, referring to the section on <Disc cleaning>

(see page 6).

• Turn off random play.

• Menu playback is available only with VCD discs recorded

with P.B.C.

• The subtitle cannot be displayed when the DVD disc being

played does not contain the recording of subtitles.

• The voice (or subtitle) language cannot be changed when

the DVD disc being played does not contain the recording
of more than one voice (or subtitle) language.

XXV-05V̲K̲En̲r1 05.2.1 8:59 AM ページ109

Содержание XXV-05V





















































































































Результаты поиска

Содержание XXV-05V

Отзывы:

Бренды по названию

Популярные бренды

Kenwood XXV-05V, Инструкция по эксплуатации

Результаты поиска

Содержание XXV-05V

Отзывы:

Бренды по названию

Популярные бренды