manualshive.com logo in svg

Kenwood XXV-05V, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood XXV-05V Скачать руководство пользователя страница 108

108 English

Troubleshooting Guide

What might appear to be a malfunction in your unit may just be the result of slight misoperation or
miswiring. Before calling service, first check the following table for possible problems.

■

General

The power does not turn on.

• The fuse has blown.

The desired source is NOT selected although you pressed the SRC button.

• An optional unit required to listen to each source is

not connected yet.

• The RESET button is not pressed yet although the

optional unit has been connected to the system.

• The "O-N" switch of the optional unit is at the "O"

position.

• A disc changer not supported by the system is used.

Nothing happens when the buttons are pressed.

• The computer chip in the unit is not functioning

normally.

No television/video image appears.

• The unit is not connected to the parking brake

detection switch.

• The parking brake is not engaged.

The screen is dark.

• The unit is in a location where temperature is low.

The screen does not darken when the vehicle’s lights are turned on.

• The unit is set to auto dimmer.

• The illumination wire has not been connected. (If

manual dimmer is set)

AM/FM radio reception is poor and/or there is noise.

• The TV antenna and vehicle‘s radio antenna are too

close.

The remote controller does not operate.

• The remote control mode selector is not set

correctly.

• After checking for short circuits in the wires, replace the

fuse with one having the same rating.

• A non-connected source is not selected. See <Connection>

(see page 94) and connect the unit correctly.

• Press the reset button (see page 4).

• Set the "O-N" switch to the "N" position.

• Use a disc changer supported by the system (see page 4).

• Press the reset button on the unit (see page 4).

• Make proper connections according to <Connections>

(see page 98).

• For safety reasons no television/video images are

displayed while the vehicle is moving. Engaging the
parking brake will cause images to be displayed.

• If the temperature of the monitor unit drops, the screen

may appear darker when power is first turned on due to
the characteristics of a liquid crystal panel. Wait a while
after turning power on for the temperature to rise. Normal
brightness will return.

• When the unit is set to auto dimmer, it is not linked to the

vehicle's light switch.

• Make proper connections according to <Connections>

(see page 98).

• Separate the two antennas as far as possible.
• Turn off the main unit.

• Switch the remote control mode selector according to the

source you select (see page 12).

XXV-05V̲K̲En̲r1  05.2.1  8:59 AM  ページ108

Содержание XXV-05V





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды