
57
Knowledge
÷
Load a disc and press the play (
6
) key.
÷
Turn the disc over and properly place it on
the disc tray.
÷
Turn on the TV.
÷
Properly reconnect the connection cords.
÷
This is not a malfunction.
÷
Set the sound volume to an appropriate
level.
÷
Press the play (
6
) key to resume normal
playback mode.
÷
Separate this unit as far as possible from
the device you think is generating the noise.
÷
Refer to the “Disc handling precautions”
section and wipe dirt from the disc.
÷
Use a new disc.
÷
Refer to the “Caution on condensation”
section and evaporate the condensation.
÷
Approximately 10 to 20 seconds are re-
quired for a disc to start playing, although
the time differs depending on the disc.
÷
Refer to the “Examples of TV screen dis-
play of each video format” section ,and use
a disc with the appropriate video format for
your TV or a TV with the appropriate video
format for the disc.
÷
Menu playback is available only with VCD
discs recorded with P.B.C.
÷
The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
÷
Press the
SUB TITLE
key to switch on the
subtitle mode.
÷
The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more than
one voice (or subtitle) language.
÷
The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle.
÷
More than one viewing angle may be re-
corded only in limited sections in a disc.
÷
There is no disc in the player.
÷
There are no signals recorded on the side of
the disc being played.
÷
The TV is not turned on.
÷
The connection cords are not properly con-
nected.
÷
The picture is slightly disrupted during fast
forward and fast reverse operations.
÷
The volume control of this set is not ad-
justed properly.
÷
The player is in a special playback mode.
÷
A nearby device is generating noise.
÷
The disc is dirty.
÷
The disc is damaged.
÷
There is condensation on the optical lens.
÷
Time is required for the unit to detect the
disc type and size and for the rotation of the
motor to stabilize. This is not a malfunction.
÷
The video format of the disc being played
does not match that of the connected TV
monitor.
÷
The VCD disc being played is not compat-
ible with P.B.C.
÷
The DVD disc being played does not contain
the recording of subtitles.
÷
The subtitle mode is set to off.
÷
The DVD disc being played does not contain
the recording of more than one audio (or
subtitle) language.
÷
The DVD disc being played does not contain
the recording of more than one angle.
÷
You are attempting to switch the angle in a
DVD section where more than one angle is
not recorded.
DVD / CD player unit
Playback does not start when the play
(
6
) key is pressed.
Playback starts but no image/sound is
seen/heard.
The picture is disrupted when the image is
fast forwarded or fast reversed.
No sound is heard.
The picture does not look good or the
picture/sound quality is poor.
It takes a while for the disc to start playing.
The top and bottom of the screen cannot
be seen.
A VCD cannot be played using menus.
The subtitle is not displayed.
The voice (or subtitle) language cannot be
changed.
The viewing angle cannot be changed.
Remedy
Cause
Symptom
In case of difficulty
(
(
@
&
(
9
R
6
¢
§
∞
¶