16
Preparations
XD-DV9 (EN/T,M,X)
This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function. The time is displayed
only while the power is off.
Switching the power ON.
Press the TIMER/CLOCK key.
Select “ADJUST TIME”,
then press the ENTER key.
Enter the figure of hour.
÷
When operating remote control unit, Press the Cursor
Left/Right keys to select figure of hour, then press the
ENTER key.
Enter the figure of minute.
Clock adjustment
÷
The time display starts to blink.
The following items can be selected by turning the
MULTI
CONTROL
jog dial.
“SLEEP TIMER”
“ADJUST TIME”
*“TIMER PLAY”
*“TIMER RECORDING”:
(Displayed when tape is
loaded in TAPE B)
“AUTO POWER SAVE”
Adjust the clock before setting the timer.
1
ON/STANDBY
TIMER/CLOCK
M
UL
TI CONTRO
L
ENTER
M
UL
TI CONTRO
L
ENTER
M
UL
TI CONTRO
L
ENTER
2
3
4
5
To increase
To decrease
Blink
÷
The minute display starts to blink.
Blink
To increase
To decrease
÷
When operating on the remote control unit, Press the
Cursor Left/Right keys to select “ADJUST TIME”.
Display the clock
TIMER/CLOCK
÷
When the
TIMER/CLOCK
key is pressed while the power
is off, the present time will be displayed for about 5
seconds.
REMOTE
MAIN UNIT
TIMER/CLOCK
For Europe and U.K.
0:00
j
1:00
j
2:00
j
•••••
j
22:00
j
23:00
For other countries
AM 12:00
j
AM 1:00
j
AM 2:00
j
•••••
j
PM11:00
For Europe and U.K.
19:00
j
19:01
j
19:02
j
•••••
j
19:58
j
19:59
For other countries
PM 7:00
j
PM 7:01
j
PM 7:02
j
•••••
j
PM 7:59
÷
When operating remote control unit, Press the
Cursor Left/Right keys to select figure of minute,
then press the ENTER key.
Blink
Blink
÷
Items marked with “*” are not shown when the
time is set first.
STANDBY
TIMER
Goes off