Kenwood VR-9060, Инструкция по эксплуатации

Страница: 33 / 48

33
EN
Convenient functions
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
For the remote control unit, press the RCV MODE key to switch
to receiver mode.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
L R
SP MUTE
A B CLIP
LFE
L R
SP
A
L R
SP
A
DOLBY PL II x
AUTO DETECT
DOLBY PL
II
x
AUTO DETECT
DOLBY PL II x
AUTO DETECT
Sleep timer
The sleep timer function turns the receiver OFF (to the standby mode)
automatically when the set timer period has elapsed. The sleep timer
period can be set in 10-minute steps up to 90 minutes.
Press the SLEEP key repeatedly until the desired period before
turning the receiver OFF (standby mode) is displayed.
• Each press increments the sleep timer period by 10 minutes.
10
=
20
=
30 .....70
=
80
=
90
=
Cancel
=
10
=
20
=
...
The “SLEEP” indicator lights up
L
SL SR
C R
SP MUTE
A B CLIP
LFE
DIGITAL DOLBY DIGITAL STEREO
SLEEP
AUTO DETECT
• Pressing the SLEEP key after the sleep timer has started allows you
to check the remaining time period.
• To cancel the sleep timer, turn the receiver OFF (standby mode) or
press the SLEEP key repeatedly until the Sleep timer indicator
disappears.
*5551/26-33/EN 2/9/05, 10:26 AM 33