21
Preparations
1
Display operation 1 key
Use this key to go back to the previous display or initial display.
2
Display operation 2 key
Gets you into and out of the preset code registration mode.
3
Display
The information for setup is displayed.
4
5
/
∞
keys
Use these keys to select the source or setup code.
5
MOVIE, MUSIC, and TV keys
Use these keys to select the input you want to register.
6
AV POWER
key
Once you have entered the setup code for another component, you can
press this key to turn power to that component on or off. This lets you
confirm that you entered the code properly.
How to use the display operation keys
To register the setup code, use the
display operation 1
key,
display
operation 2
key, or
5
/
∞
keys.
The
display operation 1
key and
display operation 2
key work as the
function key displayed in the display above.
The display goes off automatically when you do not operate for more than
8 seconds. In this case, press the
display operation 1
key,
display
operation 2
key, or
5
/
∞
keys.
When the display goes off
Press the
display operation 1
key repeatedly until “
Menu
” appears in the
display.
The display returns to the initial display.
When you are confused about what’s being displayed
>
06.Cable
>
05.VCR
Back Enter
The display operation 1 key
•
[Back]
Go back to the previous display.
•
[Home]
Go back to the initial display.
•
[Clr]
Erase the internal memory.
The display operation 2 key
•
[Enter]
Enter the selected item.
•
[Menu]
Display the menu.
•
[Setup]
Go to the setup display.
•
[Exit]
Exit from the current operation.
•
[Sel]
Select the item.
Display operation 1
5
/
∞
Display operation 2
Display
SHIFT
MACRO
MUSIC
LISTEN M.
BASS BOOST
SUB W.
MUTE
CH.
CH.
VOL.
VOL.
TUNING
BAND
ENTER
AUTO/MONO
REC MODE
F.SHIFT
REC
LEARN
RANDOM
REPEAT
INPUT SEL.
2
1
3
5
4
6
8
7
9
0
+10
+100
11
10
12
DISPLAY
TV SELECT
SELECT
THEME
AUDIO
FAVORITE
EXIT
INFO.
LAST CHANNEL
OSD
/PAGE
RETURN
/PAGE
DIMMER
TITLE/GUIDE
MENU
SOUND
THX
MOVIE
TV
AV POWER
SYS. POWER
RF REMOTE CONTROL UNIT
RC-R0812
Setting up the system
The remote control sends an RF (radio wave) signal to the receiver. For
equipment other than the receiver, an IR (Infrared) signal is sent.
The remote control supplied with this receiver is also capable of controlling
components from a variety of manufacturers once you register the appro-
priate setup codes into the remote control unit.
Refer to “Remote control operation of other components” for details about
the operations available for each component.
e
*510/20-21/EN
3/15/01, 11:41 AM
21
