Kenwood TS-890S Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 96

background image

07 DSP

29

The TS-950 series HF transceivers were the world’s first amateur radios with built-in DSPs.
The TS-870S achieves all IF signal processing with DSP, including the IF AGC for controlling the received signal level

and the steep IF filter.
The TS-590S series provides evolved IF AGC for fine sound quality durable over long-time operation and functions for

noise/interference rejection and boasts of top-level reception characteristics by means of DSP.
The TS-990S series is an integration of our traditional techniques
We have been providing “Quality” in communications that cannot be realized only by analog circuits.
The development concept of the DSP for the TS-890S is the ability of its application to actual operations. It has gone

through a thorough brush-up to deliver the best performance under harsh and unfavorable conditions.

Features of TS-890S DSP Technologies

•  Two 32-bit floating-point DSPs for transmission/reception and bandscope respectively
•  A significantly wider range of IF filter options
•  AGC Quick Recovery feature added to the well-received IF-AGC
•  Two types of digital noise blankers
•  Bandscope with high resolution and high display refresh speed

DSPs and Peripheral Hardware

32-bit floating-point DSP SHARC processor made by Analog Devices Inc., the same processor used on the TS-990S,

has been adopted for the DSPs of the TS-890S, which are kernels of digital signal processing. There are two SHARC

processors (referred to as DSPs hereafter) on the TS-890S.

Fig. 30 Two SHARC Processors

The DSP for transmission and reception is called the “TXMRX DSP”, while the DSP for signal processing for display

on the bandscope and other devices as well as for decoding in RTTY and PSK31/PSK63 modes is called the “SCP

DSP”. The TXMRX DSP and SCP DSP are placed in the DSP unit and DSPs are linked together to perform digital signal

processing.

«
...
31
32
33
34
35
...
»

Содержание TS-890S

































































































Отзывы:

Нет отзывов

Похожие инструкции для TS-890S

Бренд: Eaton Страницы: 2

MESSAGING SECURITY GATEWAY -

Бренд: F-SECURE Страницы: 19

Бренд: Fastus Страницы: 2

Бренд: Nokia Страницы: 107

Бренд: Technicolor Страницы: 6

Бренд: Promise Technology Страницы: 58

Бренд: Packet8 Страницы: 20

Бренд: Ness Страницы: 50

Бренд: ZyXEL Communications Страницы: 2

Бренд: ZyXEL Communications Страницы: 2

Бренд: Lauda Страницы: 24

Бренд: VBUZZER Страницы: 7

Бренд: IAI Страницы: 5

MULTIVOIP MVP-130

Бренд: Avaya Страницы: 1

Бренд: Haivision Страницы: 7

Бренд: Lanner Страницы: 123

Unicorn 600 Series

Бренд: Hanlong Страницы: 37

Бренд: IFM Electronic Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды