Kenwood TM?D710, Инструкция по эксплуатации

Страница: 40 / 51

34
chArActEr ENtry
Certain menus require you to enter characters, such as the power on message
and memory names. When character entry is required, a cursor will appear on
the display.
1 Press the Tuning control.
• The cursor will blink.
2
Rotate the
Tuning
control to select your desired character.
3 Press the Tuning control to set the selected character.
• The cursor will move to the next digit.
• You can move the cursor to the left or right by pressing [
←
] or
[→
] .
• You can insert one space by pressing [SPACE] .
• You can insert a character by pressing [INS] .
• You can delete the selected character by pressing [CLR] .
4 Repeat steps 2 and 3 to enter the remaining characters.
• Press [ESC] at any time to exit Menu mode.
• Press [BACK] at any time to cancel the Menu setup and return to the Menu
selection.