Kenwood TK-885 Скачать руководство пользователя страница 10

Страница: 10 / 79

TK-885

6. Firmware Programming Mode

6-1. Preface

Flash memory is mounted on the TK-885. This allows the

TK-885 to be upgraded when new features are released in
the future. (For details on how to obtain the firmware, con-
tact Customer Service.)

6-2. Connection Procedure

Connect the TK-885 to the personal computer (IBM PC or

compatible) with the interface cable (KPG-46). (Connection
is the same as in the PC Mode.)

6-3. Programming

1. Start up the programming software (Fpro. exe).
2. Set the communications speed (normally, 57600 bps) and

communications port in the configuration item.

3. Set the firmware to be updated by File name item.
4. Turn the TK-885 Power ON with the [A] switch held down.

Hold the switch down until the display changes to “PROG
57600”. When “PROG 57600” appears, release your fin-
ger from the switch.

5. Check the connection between the TK-885 and the per-

sonal computer, and make sure that the TK-885 is in the
Program mode.

6. Press write button in the window. A window opens on

the display to indicate progress of writing. When the TK-
885 starts to receive data, the icon is blinking.

7. If writing ends successfully, the LED on the TK-885 lights

and the checksum is displayed.

8. If you want to continue programming other TK-885, re-

peat steps 4 to 7.

Notes :

This mode cannot be entered if the Firmware program-
ming mode is set to Disable in the Programming software
(KPG-62D CPS).

When programming the firmware, it is recommend to copy
the data from the floppy disk to your hard disk before up-
date the radio firmware.
Directly copying from the floppy disk to the radio may not
work because the access speed is too slow.

6-4. Function

1. If you press the [

] switch while “PROG 57600” is dis-

played, the version is displayed. If you press the [

] switch

again while the version is displayed, “PROG 57600” is
redisplayed.

2. If you press the [D

] switch while “PROG 57600” is dis-

played, the display changes to “PROG 19200” to indicate
that the write speed is low speed (19200 bps). If you press
the [D

] switch again while “PROG 19200” is displayed,

the display changes to “PROG 38400”, and the write speed
becomes the middle speed (38400 bps). If you press the
[D

] switch again while “PROG 38400” is displayed, the

display returns to “PROG 57600”.

3. If you press the [D

] switch while the version is displayed,

the checksum is displayed. If you press the [D

] switch

again while the checksum is displayed, the version is
redisplayed.

Note :

Normally, write in the high-speed mode.

REALIGNMENT /

Содержание TK-885
















































































Результаты поиска

Содержание TK-885

Отзывы:

Похожие инструкции для TK-885

Бренды по названию

Популярные бренды

Kenwood TK-885, Руководство по обслуживанию

Результаты поиска

Содержание TK-885

Отзывы:

Похожие инструкции для TK-885

Бренды по названию

Популярные бренды