background image

 

2

 
Introduction .................................................................................................................... 3 
Programming the Pyramid 2012/Merlin .......................................................................... 3 
Programming the Pyramid 2016 ...................................................................................... 4 
Programming the Kenwood TK-x80 Series Mobile ......................................................... 5 

Radio Format .............................................................................................................. 5 
Programming Optional Features .................................................................................. 5 
Programming the Logic Signalling .............................................................................. 6 
Programming the Talk Group information for a 2012/Merlin MDT ............................. 6 

Defining a Talk Group for Data Use ........................................................................ 7 

Programming the Talk Group information for a 2016 Base.......................................... 8 

Connecting the Pyramid to the Kenwood TK-x80 ......................................................... 10 

Connecting the 2012/Merlin MDT to the TK-x80 radio ............................................. 10 

Jumper Settings in the 2012/Merlin ....................................................................... 10 

Connecting the 2016 base to the TK-x80 radio .......................................................... 10 

 

Содержание TK-880 series











Отзывы: