![Kenwood TK-8360 Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/kenwood/tk-8360/tk-8360_service-manual_191757004.webp)
TK-8360/8360H/8360H
(
U
)
4
Merchandise received
License and frequency allocated by FCC: K type only
Choose the type of transceiver
Transceiver programming
See page 4.
A personal computer, programming interface (KPG-46/46A),
and FPU (programming software) are required for programming.
Frequency range (MHz)
RF power
Type
450~520
450~520
45W
45W
TK-8360H K,M
450~520
25W
TK-8360 M
TK-8360H(U) K
KCT-60
Connection cable
KCT-36
Extension cable
KES-5
External speaker
KCT-18
Ignition sense cable
KES-3
External speaker
VGS-1
Voice guide &
storage unit
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
Delivery
See page 9.
See page 9.
See page 7.
See page 9.
See page 6.
SYSTEM SET-UP
1. Modes
User mode
PC mode
PC programming mode
PC test mode
PC tuning mode
Panel test mode
Panel tuning mode
Clone mode
Firmware version information
Mode
Function
User mode
For normal use.
Panel test mode
Use by the dealer to check the fundamental
characteristics.
Panel tuning mode Used by the dealer to tune the transceiver.
PC mode
Used for communication between the trans-
ceiver and PC.
PC programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
PC tuning mode
Used to tune the transceiver using the PC.
Clone mode
Used to transfer programming data from one
transceiver to another.
Firmware version
information
Used to confi rm the internal fi rmware ver-
sion.
REALIGNMENT
2. How to Enter Each Mode
Mode
Operation
User mode
Power ON
Panel test mode
[ ]+Power ON
Panel tuning mode
Panel test mode+[ ]
PC mode
Received commands from PC
Clone mode
[
]+Power ON (One second)
Firmware version information
[ ]+Power ON
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed using a personal com-
puter, a programming interface (KPG-46/46A, USB adapter
(KCT-53U)) and FPU (programming software).
The programming software can be used with a PC. Fig-
ure 1 shows the setup of a PC for programming.
TENTATIVE