![Kenwood TK-8360 Скачать руководство пользователя страница 35](http://html.mh-extra.com/html/kenwood/tk-8360/tk-8360_service-manual_191757035.webp)
TK-8360/8360H/8360H
(
U
)
35
ADJUSTMENT
Common Section
Item
Condition
Measurement
Adjustment
Specifi cations / Remarks
Test-
equipment
Unit
Terminal
Unit
Parts
Method
1. Setting
1) Power supply voltage
DC power supply terminal
:
13.6V
2. Receive
Assist
Voltage
(Automatic)
1) (Auto tuning)*
Power
meter
FPU
“Voltage Level” indi-
cator on PC window
shows VCO lock
voltage.
Change the adjust-
ment value to get
VCO lock voltage
within the limit of
the specifi ed volt-
age.
Note:
Confi rm the VCO
lock voltage approxi-
mately 3 seconds
after the adjustment
value is changed.
2.5V±0.2V
3. Transmit
Assist
Voltage
(Automatic)
1) (Auto tuning)*
2) Transmit
4. VCO Lock
Voltage
Check
•
RX
1) TEST CH: Low, Low’, Center,
High’, High (5 points)
Power
meter
DVM
TX-RX
LV
Check
2.5V±0.2V
• TX
2) TEST CH: Low, Low’, Center,
High’, High (5 points)
3) Transmit
*: At test mode, click [Tune Assist Voltage] button in test mode dialog box, then start automatic adjustment of Receive/Transmit assist voltage.
Transmitter Section
Item
Condition
Measurement
Adjustment
Specifi cations / Remarks
Test-
equipment
Unit
Terminal
Unit
Parts
Method
1. Frequency
1) TEST CH: TX center
2) Transmit
Frequency
counter
ANT
FPU
Adjust to center
frequency
Within ±100Hz
2. High Trans-
mit Power
•
TK-8360
1) TEST CH: Low, Low’, Center,
High’, High (5 points)
2) Transmit CH: TX Low’
Power
meter
Ammeter
25W
±1.0W
8.0A or less
• TK-8360H/
8360H(U)
45W
±2.0W
14.0A or less
3. Mid Transmit
Power
TK-8360H/
8360H(U)
only
1) TEST CH: Low, Low’, Center,
High’, High (5 points)
2) Transmit CH: TX Low’
25W
±1.0W
8.0A or less
4. Low Trans-
mit Power
1) TEST CH: Low, Low’, Center,
High’, High (5 points)
2) Transmit CH: TX Low’
5W
±0.5W
4.0A or less
TENTATIVE