TK-8180/8189
18
q
w
■
TK-8180 Transceiver
Installing the holder (J19-5485-02) and speaker
hardware fixture (J21-8481-03)
1. Insert two tabs of the holder (J19-5485-02) into the hol-
lows in the top of the panel. (
q
)
2. Push the two tabs of the holder in on the opposite side of
those in step 1 above and fit them into the hollow in the
bottom of the panel. (
w
)
Note :
Push in the holder until it snaps in place.
3. Install the speaker holder onto the panel. (
e
)
Note :
To improve water resistance, fit the panel into the
groove of the holder.
4. Place the speaker into the speaker holder.
Note :
The speaker must not ride on the holder rib.
5. Place the spacer on the speaker.
6. Insert the hardware fixture (J21-8481-03) into the hollow
of the panel as shown in Figure 8-3, then push two parts
of the hardware fixture and fit it into the hollow of the top
of the panel. (Fig. 8-3
r
)
Note :
Push in the hardware fixture until it snaps in place.
7. Insert the speaker connector into the display unit connec-
tor (CN901).
8. Place the speaker lead on the holder hook.
Fig. 8-1
DISASSEMBLY FOR REPAIR
Spacer
Speaker
Speaker holder
r
e
Fig. 8-2
Fig. 8-3
■
TK-8189 Transceiver
Installing the holder (J19-5469-02)
1. Insert three tabs of the holder (J19-5469-02) into the hol-
lows in the top of the panel. (
q
)
2. Push the three tabs of the holder in on the opposite side of
those in step 1 above and fit them into the hollow in the
bottom of the panel. (
w
)
w
q
Fig. 9
■
Packing (G53-1676-03) installation procedure
1. Fit the packing (G53-1676-03) in the groove of the chassis.
Note :
If the part of packing hangs out of the chassis
groove, the waterproofing function cannot be assured.
Reinsert the packing in the groove of the chassis as
shown in figure after lifting the packing from the chassis
groove.
2. Verify that the packing is securely fitted in the groove in
the chassis.
Wrong position
Correct position
Packing
Chassis
Groove of
the chassis
1. Lifting the packing
2. Reinsert the packing
1
2
Packing
Chassis
Chassis
Packing
Fig. 10-1
Fig. 10-2