10
■
Receiving a Status/Short Data Message Call
1 When a call is received, the indicator appears on the display and
flashes.
•
The indicator remains on the display when there is data in the stack.
2 To view the status or message, refer to “Viewing the Stack”, below.
Call Displays
The following messages may appear on the display under certain circumstances:
Holding:
The transceiver is confirming the call made by the base station.
Engaged:
The called party is in another call.
Queued:
All communication channels are currently in use; your status will be
sent when a channel becomes free.
Fail:
The control station received an invallid call.
NU:
You entered an invallid call address.
No Reply:
The called party has been called, but they did not respond to the call.
Call Back:
The called party has set their transceiver to queue all incoming calls.
Sys Busy:
The system is currently busy.
Viewing the Stack
1 Press the Status/ Stack key (default is the A key) twice to enter the stack.
•
If there is no data in the stack, “------------” appears on the main display and “-00”
appears on the 3-digit sub-display.
2 Press the
/
(control) keys to view the stack entries.
•
“NEW” represents a new entry, “S” represents a status stack entry, “V” represents a
voice stack entry, and “D” represents a data stack entry.
3 Press the
C and D
keys to scroll through the selected entry, to view the
entire entry.
4 To erase an entry, select the desired entry and press the key.
Содержание TK-785
Страница 20: ...17 ...
