9
TRUNKED OPERATION
■
Placing a Dispatch Call
1
Select the desired system and group using the
System
and
Group
keys.
2
Press the
PTT
switch.
3
If a tone does not sound, communication is possible; start speaking into
the microphone. Release the
PTT
switch to receive.
• For best sound quality at the receiving station, hold the microphone
approximately 1.5 inches (3 ~ 4 cm) from your mouth.
4
When your conversation is finished, return the microphone to its hanger.
■
Receiving a Dispatch Call
1
Select the desired system and group using the
System
and
Group
keys.
(If the Scan function has been programmed, you can switch it ON or OFF
as desired.)
2
When you hear the dispatcher’s voice, readjust the volume as necessary.
■
Placing a Telephone Call
Note:
You can make a telephone call only if the telephone service is available and you have an
optional keypad microphone. Refer to “MAKING A DTMF CALL” on page 17. Consult your dealer
for further details.
1
Select the desired system and group using the
System
and
Group
keys.
2
Press and hold the
PTT
switch for approximately 1 second to ensure a
connection.
• Confirm that there is a dial tone after releasing the
PTT
switch.
3
Dial using the microphone keypad.
• After dialing, wait for a response from the called party.
4
When the called party responds, press the
PTT
switch and speak into the
microphone. Release the
PTT
switch to receive.
• Only one person can speak at a time.
5
To end the call, press the
#
key or the key programmed as
Tel
Disconnect
.
TRUNKING FORMAT
