16
S
TATUS
M
ESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 15 received messages can be stored in the Queue memory of your
transceiver. These saved messages can be reviewed after reception. Depending
on your dealer settings, when the Queue memory is full, either the oldest
message will be erased when a new message is received or the new message
will not be stored in the Queue memory. The icon lights when a message is
stored in the Queue memory.
■
T
RANSMITTING
1
Select your desired zone and channel.
2
Press the key programmed as
Status
to enter Status Mode or
S
Status
to enter Selcall Mode.
• When using the
Status
key to enter Status Mode, the station ID is fixed and
cannot be selected. Skip to step 5 to continue.
3
In Selcall Mode, press the
<B
and
C>
keys to select the ID of the station
you want to call.
• If programmed by your dealer, you can also use the and keys.
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad
or by selecting digits with the and keys. To enter manual input mode, first
press and hold the
S
or DTMF
key. When using the and keys, cycle
through the digits to select a digit, then press the
C>
key to accept the digit and
shift the cursor to the right. Repeat this process until the entire ID is entered.
4
Press
the
S
or DTMF
key to enter Status Mode.
5
Press
the
<B
and
C>
keys to select the status ID you want to transmit.
• If programmed by your dealer, you can also use the and keys.
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad
or by selecting digits with the and keys. To enter manual input mode, first
press and hold the
S
or DTMF
key. When using the and keys, cycle
through the digits to select a digit, then press the
C>
key to accept the digit and
shift the cursor to the right. Repeat this process until the entire ID is entered.
6
Press the microphone
PTT
switch or
■
key to initiate the Status call.
• “
” is displayed when the call has been successfully transmitted.
■
R
ECEIVING
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to Normal Operation Mode.
