TK-7180H/7182H
55
Controls
Panel Test Mode
■
Test mode operation features
This transceiver has a test mode.
To enter test mode,
press and hold the [A] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily.
Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■
Key operation
Key
“
]
” not appears *1
Function
Display
[S]
Shifts to Panel tuning mode
-
[A]
Function on
“
]
” appears *1
[B]
MSK 1200bps and 2400bps
2400bps :
icon appears
[C]
Test signaling CH up
Signaling No.
[ ]/[ ]
Test frequency CH up/down
Channel No.
[ ]/[ ]
Volume up/down
-
[
]
Squelch on/off
[
■
]
Narrow/Wide
Narrow : “N”
Wide : “W”
Microphone key
[PTT]
Transmit
-
[0] to [9]
Use as the DTMF keypad.
-
and [A],
If a key is pressed during
[B], [C],
transmission, the DTMF
[D], [#],
corresponding to the key
[
*
]
that was presses is sent.
Key
“
]
” appears *1
Function
Display
[S]
High power / Low power
Low : icon appears
[A]
Function off
-
[B]
Compander on/off
On : icon appears
[C]
Beat shift on/off
On : icon appears
[ ]/[ ]
Function off
-
[ ]/[ ]
Function off
-
[
]
Squelch level 0
On :
icon appears
[
■
]
LCD all lights
LCD all point appears
Microphone key
[PTT]
Transmit
-
[0] to [9]
Function off
-
and [A],
[B], [C],
[D], [#],
[
*
]
Note :
If a [S], [A], [B], [C] key is pressed during transmission, the
DTMF corresponding to the key that was pressed is sent.
• LED indicator
Red LED
Lights during transmission.
Green LED
Lights when there is carrier.
• LCD display in panel test mode
Power
switch
Modular
MIC jack
Programmable
function keys
Volume
Up/Down key
Channel
Up/Down key
LCD
N
1
1
–
Channel No.
N : Narrow
W : Wide
Signaling No.
ADJUSTMENT (TK-7182H)
*1 : “
]
” appears at the position as shown in figure below.