KENWOOD CORPORATION
TK-5800 FCC ID: K4437184110
3)
DISPLAY LCD
No. Name
Description
1
Dot Matrix(12digits)
Alphanumeric display
Channel/GID display
Zone display
2
Dot Matrix(3digits)
Channel/GID display
Zone display OST list number display
3
Signal
strength
indicator
4
Monitor on display
5
Talk around display
6
Scan
display
7
Message
stack
display
8
Priority channel 1/2 display
9
Telephone ID display
10
Horn alert display
11
Option
board
display
12
Public address display
13
Zone add display
14
Auto Recording Display on VGS-1 option
15
Auto Reply Message Display on VGS-1 option
16
CH/GID add display
17
AUX
A
display
18
AUX
B
display
19
OST
display
TX/BUSY INDICATION
No. Name
Description
1 Red
TX
display
2 Green
Busy
display
3 Orange
Call
display
OPERATING BASICS
ATING
•
Switching Power ON/OFF
Press the switch to switch the transceiver ON.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
•
Adjusting the Volume
The V
Volume Up/Down SW control to adjust the volume. You can adjust the volume up sw to increases the volume
and the volume down sw to decreases it.
• Selecting a Channel
The C
Channel Up/Down SW to select a channel.
The channel up sw the channel number increases and The channel down sw decreases it.
•
Transmitting
Note: Before transmitting, first monitor the channel to make sure it is not already in use.
1 Select your desired channel.
•If the channel is busy, wait until it becomes free.
2
Press the microphone P
PTT switch and speak into the microphone. Release
the P
PTT switch when you have finished speaking.
•For best sound quality at the receiving station, hold the microphone approximately 1.5 inches (3~4cm) from
your mouth.
