Kenwood TK-2360, Инструкция по эксплуатации

Страница: 17 / 52

9
■
Emergency
Press and hold this key to enter Emergency mode. When
the transceiver enters Emergency mode, it will change to
the Emergency channel and begin transmitting based on
your dealer settings.
Note: This function can be programmed only on the Auxiliary
key.
■
Key Lock
Press this key to lock and unlock the transceiver keys.
While Key Lock is activated, you cannot use the
Auxiliary ,
Side 1 , Side 2 , and microphone PF keys.
Note: You can still use the following key functions when Key
Lock is activated: Emergency, Lone Worker, Monitor, Monitor
Momentary, Squelch Off, Squelch Off Momentary, Key Lock,
PTT + Autodial, PTT + 2-tone.
■
Lone Worker
Press this key to toggle the Lone Worker function ON or
OFF. If the transceiver is not operated for the
pre-programmed time, it will emit a Lone Worker tone.
Subsequently, if no operation is performed while the tone is
emitted, the transceiver will enter Emergency mode.
■
Low Transmit Power
Press this key to change the transmit power on the current
channel to low power, to conserve battery energy.
■
Monitor
Press this key to deactivate QT or DQT signaling. Press
this key again to return to normal operation.