6
TK-2212L
The setup items for item setting mode are as follows.
Key operation
REALIGNMENT
Key operation
Note :
If a non-existing Zone-Channel is selected and the memory
for all 128 channels is already filled, an error tone will sound
and "MEM.FULL" will appear on the LCD for 2 seconds.
5-4. Item Selection Mode
In this mode, the following items can be selected.
•
RX frequency
•
RX signaling
•
TX frequency
•
TX signaling
•
Wide/ Narrow
•
RF power Hi/Low
•
Scan Del/Add
•
Beat shift on/off
•
Compander on/off
When the [S] key is pressed in the Channel Selection mode,
the transceiver enters the Item Selection mode.
Key operation
5-5. Item Setting Mode
In this mode, the selected item in the Item Selection mode
can be programmed.
When the [S] key is pressed in the Item Selection mode,
the transceiver enters the Item Setting mode.
Key
Key Function
[Selector]
Toggle between Zone selection and Channel selection.
[Side1]
No action
[Side2]
No action
[S]
Enter the Item Selection mode
[A]
Error tone sounds
[<B]
Decrement the blinking Zone/Channel number by 1.
Press and hold to decrement in steps of 10.
[C>]
Increment the blinking Zone/Channel number by 1.
Press and hold to decrement in steps of 10.
Key
Key Function
[Selector]
The selected item changes
[Side1]
No action
[Side2]
No action
[S]
Enter the Item Setting mode
[A]
Return to the Channel Selection mode
[<B]
Error tone sounds
[C>]
Error tone sounds
Setup item
Display
Remarks
1.RX frequency
1. RX FREQ
→
Receive frequency
∗∗∗
.
∗∗∗∗∗
100.00000~280.00000MHz
2.RX signaling
2. RX SIG
→
Receive QT/DQT
TONE OFF/
QT
∗∗∗
.
∗
/
DQT
∗∗∗
N/
DQT
∗∗∗
I
3.TX frequency
3. TX FREQ
→
Transmit frequency
∗∗∗
.
∗∗∗∗∗
100.00000~280.00000MHz
4.TX signaling
4. TX SIG
→
Transmit QT/DQT
TONE OFF/
QT
∗∗∗
.
∗
/
DQT
∗∗∗
N/
DQT
∗∗∗
I
5. Wide / Narrow
5. BAND
∗
W / N
6.RF power Hi / Low 6. PWR
∗∗∗
HI / LOW
7.Scan Del / Add
7. SCN
∗∗∗
DEL / ADD
8.Beat shift on / off
8. SFT
∗∗∗
ON / OFF
9.Compander on / off 9. CMP
∗∗∗
ON / OFF
Key
Key Function
[Selector]
Changing the selection item (RX/ TX frequency and
RX/ TX signaling only)
[Side1]
No action
[Side2]
No action
[S]
• Store the current settings and return to the Item
Selection mode.
• A MHz digit of the frequency blinks.
(RX/ TX frequency only)
• The icon of the current signaling configuration blinks.
(RX/ TX signaling only)
[A]
Abort the current settings and return to the Item
Selection mode without backup.
[<B]
Toggle/ Decrease the blinking value.
[C>]
Toggle/ Increase the blinking value.
