4
TK-2107
TK-260
:K, K2
DISASSEMBLY FOR REPAIR
Separating the case assembly from the chassis
1. Remove the two knobs
and three round nuts
.
2. Remove the two screws
.
3. Expand the right and left sides of the bottom of the case
assembly, Iift the chassis, and remove it from the case
assembly
.
4. Taking care not to cut the speaker lead
, open the chassis
and case assembly.
Separating the chassis from the unit
1. Remove the eleven screws
.
2. Remove the solder from the antenna terminal using a
soldering iron then lift the unit off
.
3. Remove the two screws
and remove the antenna
connector.
Note : When reassembling the unit in the chassis, be sure to
solder the antenna terminal.
Removing the lever
1. Raise the lever on the lower case
, insert a small flat
screwdriver into the space between the case and lever,
open the case carefully
and lift the lever off.
Note : Do not force to separate the case from the lever.
Lever knob
Cace assembly
Antenna terminal
Содержание TK-2107
Страница 22: ...22 TK 2107 TK 260 K K2 M3 BPF Wave ADJUSTMENT Fig 1 ...
Страница 26: ...32 31 BLOCK DIAGRAM TK 2107 TK 2107 ...
Страница 29: ...35 TK 2107 TK 260 K K2 MEMO ...