Kenwood TH-K40A страница 3 Скачать руководство пользователя | Manualshive

Страница: 3 / 68

background image

i

NOTICES TO THE USER

One or more of the following statements may be applicable:

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.

•

Consult the dealer for technical assistance.

ATTENTION: (USA only)

The RBRC Recycle seal found on

KENWOOD

lithium-ion (Li-ion) battery packs

indicates

KENWOOD

’s voluntary participation in an industry program to collect and

recycle Li-ion batteries after their operating life has expired. The RBRC program is

an alternative to disposing Li-ion batteries with your regular refuse or in municipal

waste streams, which is illegal in some areas.
For information on Li-ion battery recycling in your area, call (toll free)

1-800-8-BATTERY (1-800-822-8837).

KENWOOD

’s involvement in this program is part of our commitment to preserve our

environment and conserve our natural resources.

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

«
1
2
3
4
5
...
»

Содержание TH-K40A





































































Отзывы:

Нет отзывов

Похожие инструкции для TH-K40A

Бренд: TIDRADIO Страницы: 11

Бренд: JBL Страницы: 11

Бренд: Baofeng Страницы: 7

Бренд: unicraft Страницы: 60

Бренд: Ericsson Страницы: 16

Бренд: Kohler Страницы: 72

Бренд: Ericsson Страницы: 22

Бренд: VICI DBS Страницы: 41

Бренд: SenHaiX Страницы: 7

Бренд: Edwards Signaling Страницы: 10

Бренд: Curtis Страницы: 28

Бренд: Dell Страницы: 32

Бренд: Philips Страницы: 22

Бренд: Philips Страницы: 24

Бренд: Philips Страницы: 27

Бренд: Philips Страницы: 30

Бренд: Philips Страницы: 32

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды