Kenwood RXD-V252, Руководство по обслуживанию

Страница: 4 / 26

RXD-V252/V252-H
4
CIRCUIT DESCRIPTION
Block Diagram for MPEG1 Video/Audio Processing
RAS#
Processor
LA(17:0)
DRAM Interface
DA(8:0)
Interface
LD(7:0) Huffman DBUS(15:1)
LCS3#, LCS#(1:0)
RISC
Decoder
DOU# DRAM
LWR#
Processor
2Kx32 ROM DWE#
LOE# 2x32 SRAM CAS#
ACLK AUX(7:1)
AUX
Serial
ATCLK
MPEG
Audio AIN
Serial Audio
Processor
Interface AOUT
Interface
ARFS 64x32 ROM YUV(7:0)
ATFS 32x32 SRAM PCLK2X Screen
ARCLK
Registers Video Output
PCLK
VSYNC
HSYNC
TDM SEL
-
PLL(1:0)
TDM
Interface TDMCLK
Interface
On Screen
TDMDR
Display
CPUCLK
Misc
TDMFS DRAM DMA RESET#
Controller
Port No. Port Name I/O Function
1,31,51 VCC3 - Supply voltage for 3.3V.
2 RAS# O DRAM row address strobe (active low).
3 DWE# O DRAM write enable (active low).
4~12 MA(0~8) O DRAM multiplexed row and column address bus.
13~28 DBUS(0~15) I/O DRAM data bus.
29 RESET# I System reset (active low).
30,50,80,100 GND - Ground.
32~39 YUV(0~7) O
Y is luminance, UV are chrominance data bus for screen video interface.
YUV(0~7) for 8 bit YUV mode.
40 VSYNC I/O
Vertical sync for screen video interface, programmable for rising or
falling edge.
41 HSYNC I/O
Horizontal sync for screen video interface, programmable for rising or
falling edge.
42 CPUCLK I RISC and system clock input.
43 PCLK2X I/O Pixel clock: two times the actual pixel clock for screen video interface.
44 PCLK I/O Pixel clock qualifier in for screen video interface.
45~49,52,53,54 AUX(0~7) I/O Auxiliary control pins (AUX0 and AUX1are open collectors).
55~62 LD(0~7) I/O RISC interface data bus.
63 LWR# O Unused.
64 LOE# O RISC interface output enable (active low).
65,66,67 LCS(3,1,0)# O RISC interface chip select (active low).
68~79,82~87 LA(0~17) O RISC interface address bus.
81 VCC - Digital supply voltage for 5.0V.
88 ACLK I/O
Master clock for external audio DAC(8.192MHz, 11.2896MHz, 12.288MHz,
16.9344MHz, and 18.432MHz).
O Dual-purpose pin. AOUT is the audio interface serial data output.
Pins SEL -PLL(1: 0) select phase-lock loop(PLL) clock frequency
89 AOUT/SEL/PLL0 I CPUCLK for the Visba : 00 = bypass PLL 01 = 54MHz PLL
10 = 67.5MHz PLL 11 = 81MHz PLL
90 ATCLK I/O Audio transmit bit clock.
O Dual-purpose pin. ATFS is the audio interface transmit frame sync.
91 ATFS/SEL/PLL1 I
Pins SEL -PLL(1: 0) select phase-lock loop(PLL) clock frequency CPUCLK
for the Visba. See the SEL -PLL0 pin above for the settings.
92 DOE O
Dual-purpose pin. DRAM output enable (active low)/DRAM multiplexed
row and column address bus.
93 AIN I Audio interface serial data input.
94 ARCLK I Audio receive bit clock.
95 ARFS I Audio interface receive frame sync.
96 TDMCLK I TDM interface serial clock.
97 TDMDR I TDM interface serial data receive.
98 TDMFS I TDM interface frame sync.
99 CAS# O DRAM column address strobe bank 0 (active low).
Port Function of MPEG1 Video/Audio Processing : ES3880 (ICM2)