RXD-V252/V252-H
2
CONTENTS / ACCESSORIES / CAUTIONS
CONTENTS / ACCESSORIES / CAUTIONS ............. 2
EXTERNAL VIEW .......................................................3
CIRCUIT DESCRIPTION ............................................4
ADJUSTMENT ............................................................7
WIRING DIAGRAM .....................................................8
PC BOARD ................................................................ 9
SCHEMATIC DIAGRAM .......................................... 15
EXPLODED VIEW ....................................................25
PARTS LIST..............................................................27
SPECIFICATIONS ......................................Back cover
Contents
AC Plug Adaptor (1)
(E03-0115-05)
Use to adapt the plug on the
power cord to the shape of the
wall outlet.
(Accessory only for regions where
use is necessary.)
AM Loop Antenna(1)
(T90-0879-08)
"AA" size battery(2)
(UM/SUM-3, R6, HP-7 or similar)
Remote Control(1)
(A70-1574-08)
FM Antenna(1)
(T90-0883-08)
Video Cable(1)
(E30-7255-08)
The marking of products using lasers
(Except for some areas)
The marking is located on the rear panel and
says this product has been classified as Class
1. It means that there is no danger of hazard-
ous radiation outside the product
CLASS 1
LASER PRODUCT
Accessories
Model
Color
M(General Market)
I(Malaysia)
RXD-V252
Blue
-
I
RXD-V252-H
Gray
M
I2
System Configurations
Cautions
Attention
Please contact our KENWOOD Service Department in your side if you want the service information; Circuit Description. Full
Described Parts list and so. Information is available to you by internet from us.
RESETTING THE MICROCOMPUTER
Reset the microcomputer under the following con-
ditions :
•
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
•
If the display is not correct.
•
If the operation is not correct.
1
Press the ON/STANDBY button to enter
the standby mode.
2
Whilst pressing down the
7
STOP button and
the SOUND MODE button, hold down the
ON/STANDBY button for at least 1 second.
•
“CLEAR AL” will appear .
Caution :
•
The operation explained above will erase all data
stored in memory including clock and timer set-
tings, and tuner and CD presets.
TRANSPORTING THE UNIT
Before you move this product to a new location,
proceed as follows :
1
Press the ON/STANDBY button to turn the
power on.
2
Press the CD button.
3
Press the
0
OPEN/CLOSE button to open the
disc tray.
•
Remove all CDs inserted in the unit.
4
Press the
0
OPEN/CLOSE button to close the
disc tray.
•
Make sure that “NO DISC” is displayed.
5
Press the ON/STANDBY button to enter
the standby mode and then unplug the AC power
cord from the AC socket.
SOUND
MODE
ON/
STANDBY
7
STOP
ON/
STANDBY
CD
0
OPEN/CLOSE
