![Kenwood RXD-655 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/kenwood/rxd-655/rxd-655_service-manual_192897013.webp)
RXD-655/755
13
CIRCUIT DESCRIPTON
3-3 Contents of the Test Mode
3-3-1 CD Test Mode
Enter the Test Mode
OPEN/CLOSE operation is using manual
<<
$ !
>>, <<
⁄ ›
>> buttons make pick's slide possible.
<< PLAY >> key input
<< MEMORY >> key input
Do TOC IL. Do normal play
Laser ON.
When these following key is input
into PLAY key, track number can
<< MEMORY >> key input
be appoint directly
Tracking OFF play at that
specific point
<< MEMORY >> key input
Remote Controller Only
<<DISC 1>> key: Track 4
Tracking ON play from that
<<DISC 2>> key: Track 9
specific point
<<DISC 3>> key: Track 15
<< MEMORY >> key input
<< STOP >> key input
STOP
<< STOP >> key input
STOP
XX :Hex value
Sliding the PICKUP with
<<
$ !
>>, <<
⁄ ›
>>button
must only be in STOP mode.
D
S
T
E
T
C
Adjustment result
automaticallywill
display as below
for each 2 sec :
a)"FOFF__XX"
b)"TOFF__XX"
c)"TBAL__XX"
d)"TGAN__XX"
f)"FGAN__XX"
g)"RFLS__XX"
Adjustment result automatically will
display as below for each 2 sec :
a)"FOFF__XX"
b)"TOFF__XX"
c)"TBAL__XX"
d)"TGAN__XX"
f)"FGAN__XX"
g)"RFLS__XX"
<< MEMORY >>
key input
Function:
-
Software RESET.
-
All the function condition will be initialize.
-
It will jump to A operation in case of power ON.
-
After display "CLEAR ALL", power will off.
-
Forwarding condition set for CD changer.
-
Forwarding condition set for TAPE mecha.
"CLEAR_AL" display
L
E
A
R
L
A
C
3-3-2 Software Reset