9
BASIC OPERATIONS
POWER AND VOLUME
1
Hold the
Power
switch for approximately 1 second to switch
the transceiver power ON.
•
A beep sounds and the LED indicator blinks blue a number of
times as described in the “BATTERY LEVEL GUIDE” table on
page 10.
•
To turn the power OFF, hold the
Power
switch for 2 seconds.
2
In Volume Adjustment mode, press the
Up/Down
keys to
adjust the volume.
•
Press the key programmed as
[Squelch Off]
to hear
background noise.
• Press
the
PF-2
key to switch between Volume Adjustment
mode and Channel Select mode.
TRANSMITTING AND RECEIVING
1
In Channel Select mode, press the
Up/Down
keys to select
your desired channel.
•
After selecting a channel, the transceiver announces the
channel number and the LED indicator blinks yellow for a
number of times corresponding to the channel number. For
example, when selecting channel 3, “three” is announced and
the LED indicator blinks yellow 3 times.
• Press
the
PF-2
key to switch between Volume Adjustment
mode and Channel Select mode.
2
To make a call, press and hold the
PTT
switch, then speak
into the microphone using your normal speaking voice.
•
Hold the microphone approximately 1.5 inches (3 to 4 cm) from
your mouth.
3
Release the
PTT
switch to receive.
Note:
◆
When the battery pack voltage becomes too low, transmission
will stop and an alert tone will sound. (Low Battery Warning:
While operating the transceiver, the Low Battery Warning
sounds an alert tone every 30 seconds and the LED indicator
blinks red when the battery needs recharged or replaced.)
Содержание ProTalk LT PKT-23
Страница 1: ...INSTRUCTION MANUAL B62 2576 20 K UHF FM TRANSCEIVER PKT 23 ...
Страница 33: ...MANUAL DE INSTRUCCIONES TRANSCEPTOR FM UHF PKT 23 ...
Страница 34: ......