manualshive.com logo in svg

Kenwood ProTalk DIGITAL NX-P1200NV, Руководство пользователя, Страница: 45 / 51

Поделиться
Скачать
Kenwood ProTalk DIGITAL NX-P1200NV Скачать руководство пользователя страница 45

45

5

  Press the 

PTT

 switch to save the settings.

•  Beep A (1 beep) will sound.
•  The transceiver announces the new VOX Gain level.

6

  Turn the transceiver power OFF and then ON again to activate VOX.

Note:

 

◆

If a headset is connected to the transceiver while the VOX function is switched ON 
and the VOX Gain level is configured to a higher, more sensitive level, louder received 
signals may cause the transceiver to start transmission.

 

◆

If no action is performed for 20 seconds, the transceiver will automatically return to 
normal operation without changing any settings.

VOX Operation

1

  To transmit, simply speak to the microphone.

2

  When you finish speaking, transmission ends.

Semi-VOX Operation

1

  To transmit, press the 

PTT

 switch 

or the button programmed as 

[Second PTT]

.

2

  Release the 

PTT

 switch 

or the button programmed as 

[Second PTT]

.

3

  Transmission continues while speaking.

4

  When you finish speaking, transmission ends.

Содержание ProTalk DIGITAL NX-P1200NV




















































Отзывы:

Нет отзывов