Kenwood ProTalk DIGITAL NX-P1200NV Скачать руководство пользователя страница 20

Страница: 20 / 51

Reserved Group Setup (Digital)

Reserved Group Setup allows you to configure the Reserved Group ID.
Reserved Group ID is the ID that is the destination of Group Call communication

in the channel where Selcall on PTT > Call Type (NXDN) is set to “Reserved

Group”.
You can set the Reserved Group ID from “00001” to “65519”. The default ID is

“00100”.

• Only on the channels in Zone 4 of NX-P1300NU, Reserved Group function

(making a Group Call with the Reserved Group ID) can be used by default

settings.

• If you use Reserved Group function on NX-P1200NV or the other zones of NX-

P1300NU, the settings by your dealer are required.

• Reserved Group ID: 00100 is compatible with NX-P500.
• If other parties use the same frequency, changing the Reserved Group ID

and making a Group Call with a Group ID other than “00100” can prevent

unnecessary reception.

A group call is initiated to the transceiver of the same Reserved Group ID if the

PTT

switch is pressed.

Transceiver A

Reserved Group

ID : 00100

Group Call receiving transceivers

Group Call

Transceiver B

Reserved Group

ID : 00100

Transceiver C

Reserved Group

ID : 00100

Transceiver D

Reserved Group

ID : 00100

To set the Reserved Group ID

With the transceiver power OFF, press and hold the

Side 1

button and

PTT

switch while turning the transceiver power ON.

• Continue to hold the

Side 1

button and

PTT

switch until the LED lights

yellow and the transceiver announces “Self”.

Release the

Side 1

button and

PTT

switch to enter the ID SETUP/ ZONE

SELECTION.

Содержание ProTalk DIGITAL NX-P1200NV




















































Результаты поиска

Содержание ProTalk DIGITAL NX-P1200NV

Отзывы:

Похожие инструкции для ProTalk DIGITAL NX-P1200NV

Бренды по названию

Популярные бренды

Kenwood ProTalk DIGITAL NX-P1200NV, Руководство пользователя

Результаты поиска

Содержание ProTalk DIGITAL NX-P1200NV

Отзывы:

Похожие инструкции для ProTalk DIGITAL NX-P1200NV

Бренды по названию

Популярные бренды