Kenwood NX-840, Руководство по обслуживанию

Страница: 4 / 54

1-4 (No.RA011<Rev.001>)
SECTION 1
PRECAUTION
This service manual does not describe PRECAUTION.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1 SYSTEM SET-UP
2.2 REALIGNMENT
2.2.1 Modes
2.2.2 How to Enter Each Mode
Merchandise received
Choose the type of transceiver
Transceiver programming
KCT-60
Connection cable
KCT-36
Extension cable
KES-5
External speaker
KCT-18
Ignition sense cable
KES-3
External speaker
A personal computer, programming interface (KPG-46A/46U),
and FPU (programming software) are required for programming.
Frequency range (MHz)
RF power Type
450~520 25W NX-840 M
NX-840H K
NX-840H(U) K
450~520
450~520
45W
45W
(Option)
(Option)
(Option)
(Option)
(Option)
Delivery
Mode Function
User mode For normal use.
PC mode Used for communication between the
transceiver and PC (IBM compatible).
PC programming
mode Used to read and write frequency data
and other features to and from the
transceiver.
PC test mode Used to check the transceiver using the
PC.
This feature is included in the FPU.
PC tuning mode Used to tune the transceiver using the
PC.
Clone mode Used to transfer programming data
from one transceiver to another.
User mode
Data programming mode
PC tuning mode
Clone mode
PC mode
PC test mode
Mode Function
User mode Power ON
PC mode Received commands from PC
Clone mode [ ] + Power ON (Two seconds)