NX-203
38
TROUBLE SHOOTING
Note:
• When using the ESN Validation function of NXDN Trunk-
ing, the NXDN ESN number changes when the circuit
board is changed (the number is written on the circuit
board); the NXDN Trunking System cannot be accessed.
Use the KPG-110SM on the NXDN Trunking System side
to reprogram the NXDN ESN number.
• When a new printed circuit board is used, the KENWOOD
ESN changes, as does the Transceiver Information display
of the KPG-111D/111DN, but this does not have any effect
on the operation of the transceiver.
• If changing to the original KENWOOD ESN and NXDN
ESN, please contact our service center.
ADJUSTMENT
Controls
MIC
Selector
Power switch / Volume
Orange key
PTT switch
Side1 key
Side2 key
Universal
connector
Panel Test Mode
■
Test mode operation features
This transceiver has a test mode.
To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily.
Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
(Not used)
NXDN ESN Label
(12 digits)
KENWOOD
ESN Lable
(Not used)
(Not used)
Cut-off
Line
Note:
A UPC code and UPC barcode is not printed on the
KENWOOD ESN Label. If necessary, cut the label at the cut-
off line and attach only the serial number.
Содержание NX-203
Страница 99: ...NX 203 99 MEMO ...
Страница 100: ...Printed in Japan No RQ076 Communications Systems Business Unit ...