6
BASIC OPERATIONS
SWITCHING POWER ON/ OFF
Press
to switch the transceiver ON.
•
A beep sounds and the display illuminates.
•
If the Transceiver Password function is programmed, “PASSWORD” will appear on the
display.
Press
again to switch the transceiver OFF.
■
Transceiver
Password
To enter the password:
1
Press
the / key to select a digit.
•
When using a microphone DTMF keypad, simply enter the password digits and
proceed to step 4.
2
Press
the
S
or key to accept the entry and move to the next digit.
• Press the
A
or
#
key to delete an incorrect digit.
• Press the
C>
key to delete all.
3
Repeat steps 1 and 2 to enter the entire password.
• The password can contain a maximum of 6 digits.
4
Press the
S
or key to confi rm the entered password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
ADJUSTING THE VOLUME
Press the
[Volume Up]
key to increase the volume. Press the
[Volume Down]
key to
decrease the volume.
If Squelch Off has been programmed onto a key, you can use that function to listen to
background noise while adjusting the volume level.
SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone and channel/group ID using the keys programmed as
[Zone Up]
/
[Zone Down]
and
[CH/GID Up]
/
[CH/GID Down]
.
•
You can program names for zones and channels/group IDs with up to 10 characters.
•
If the Voice Announce function has been set up by your dealer, an audio voice will
announce the new zone, channel and group number when changing the zone, channel,
and/or group.
TRANSMITTING
1
Select the desired zone and channel/group ID.
2
Press the key programmed as
[Monitor]
or
[Squelch Off]
to check whether or not the
channel is free.