(No.RA018<Rev.002>)1-65
4.13.2 Key operation
4.13.3 5 or 9 reference level adjustments frequency
High Transmit Power, Medium Transmit Power, Low Trans-
mit Power, Balance, Maximum Deviation , P25 High Devia-
tion, P25 H-CPM Deviation, NXDN High Deviation, QT
Deviation, DQT Deviation, LTR Deviation, DTMF Deviation,
Single Tone Deviation, MSK Deviation, CW ID Deviation,
Sensitivity 1, Sensitivity 2, RSSI Reference, Open Squelch,
Low RSSI, High RSSI, Tight Squelch
Receive Assist, Transmit Assist
4.13.4 Adjustment item supplement
Key
Function
Push
Hold (1 second)
[Selector] -
[
]
Adjustment value up
Continuation up
[
]
Adjustment value down
Continuation down
[
]
Auto adjustment start
-
[
]
Wide 5k/Wide 4k/
Narrow/P25/NXDN
-
[ Side1 ] -
[ Side2 ] -
[ Side3 ] -
[ ]
Shift to panel test mode
-
[ ]
To enter 5,9 or 17 refer-
ence level adjustments
-
[ ]
Writes the adjustment
value
-
[ ]
Go to next adjustment
item
Back to last adjustment
item (At the time of 5, 9 or
17 point adjustment: Ad-
justment point change)
[AUX
(Orange)]
Output tone pattern
change of balance ad-
justment (A change is
possible only during bal-
ance adjustment.)
-
[PTT]
Transmit
[0] to [9]
and
[#],[
]
-
Tuning point
Display
RX (MHz)
TX (MHz)
1
Low 1
136.05000
136.10000
2
Low 3
145.55000
145.60000
3
Center 2
155.05000
155.10000
4
High 1
164.55000
164.60000
5
High 3
173.95000
173.90000
Tuning point
Display
RX (MHz)
TX (MHz)
1
Low 1
136.05000
136.10000
2
Low 2
140.80000
140.85000
3
Low 3
145.55000
145.60000
4
Center 1
150.30000
150.35000
5
Center 2
155.05000
155.10000
6
Center 3
159.80000
159.85000
7
High 1
164.55000
164.60000
8
High 2
169.30000
169.35000
9
High 3
173.95000
173.90000
Adjustment Item
Description
Receive Assist
The lock voltage of VCO (Receive) is ad-
justed.
This item must be adjusted before all ad-
justment items for receiver section are
adjusted.
Transmit Assist
The lock voltage of VCO (Transmit) is ad-
justed.
This item must be adjusted before all ad-
justment items for transmitter section are
adjusted.
Frequency
Frequency is adjusted under receiving
condition with SSG.
The SSG needs 0.003ppm accuracy so
please use a standard oscillator if neces-
sary.
This item can be adjusted only in PC Test
Mode so that the adjustment value is not
changed easily.
Ramp Offset
Adjust this item to the optimal Ramp volt-
age.
High Transmit
Power
High Transmit Power is adjusted.
Medium Transmit
Power
Medium Transmit Power is adjusted.
Low Transmit
Power
Low Transmit Power is adjusted.
Balance
The transmit modulation frequency re-
sponse is adjusted.
This item is adjusted so that the deviation
of 2kHz becomes the same deviation of
20Hz.
This item must be adjusted before all ad-
justment items for deviations are adjust-
ed.
Maximum Deviation
(P25/NXDN)
Maximum Deviation of P25/NXDN is ad-
justed.
Maximum Deviation
(Analog Wide 5K/
Wide 4K/Narrow)
Maximum Deviation of Analog (Wide 5K/
Wide 4K/Narrow) is adjusted.
This item must be adjusted before all ad-
justment items for tone deviations are ad-
justed.
QT Deviation
QT deviation is adjusted.
Содержание Nexedge NX-5200
Страница 87: ... No RA018 Rev 002 1 87 Image Universal connector with tape Packaging with the LCD facing down ...
Страница 103: ... No RA018 Rev 002 1 103 ESN Label Layout Note Cut a UPC code and UPC barcode at dotted line ESN Label ...
Страница 104: ...MEMO ...
Страница 126: ... No RA018 Rev 002 VSE Printed in Japan JVC KENWOOD Corporation Communications Systems Business Unit ...
