12
SELECTING A ZONE AND CHANNEL
1
Select the desired zone using the key programmed as
[Zone Up]
or
[Zone Down]
.
•
Each zone contains a group of channels.
2
Select the desired channel using the
Channel
selector.
•
Each channel is programmed with settings for transmitting and
receiving.
TRANSMITTING
1
Select the desired zone and channel.
2
Press the key programmed as
[Monitor]
or
[Squelch Off]
to check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
•
For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only
if the received signal matches your transceiver settings.
Note:
Signaling allows your transceiver to code your calls. This will
prevent you from listening to unwanted calls. Refer to “SIGNALING”
on page 17 for details.
B62-2580-00_01-18.indd 12
7/5/13 1:56 PM
