22
Press the
<MENU>
, button and select
"System Settings"
and then
"Equalizer"
. You can select
a sound profile with the
<UP>
or
<DOWN>
buttons and then confirm with
<OK>
. The following
profiles are available:
Powerful / Clear / Bright / Warm / Balanced
16.2 Network settings
16.2.1 Network wizard
The network assistant helps to connect the radio to the Internet. To call it up, please proceed as
follows:
Select the
"Network"
in the
"System Settings"
menu and then confirm
"Network Wizard"
. The
radio now starts a search for available WLAN connections and then lists them. The various networks
can be selected using the
<UP>
or
<DOWN>
buttons and the
<TUNE>
knob. At the end of the list
there is the option to select
"[Rescan]"
or
"[Manual config]"
.
16.2.2 Wireless network connection (WLAN)
Depending on the network, you have several options to choose from to connect to the network.
Networks that support a WPS connection (Wi-Fi Protected Setup) are identified in the list by the
preceding designation
"[WPS ...]"
. Other connections are open networks or connections that are
protected by the PSK method = pre-shared key (previously agreed key).
Note:
An active network connection is indicated by a white symbol at the bottom right of the display.
If no connection is active, this symbol is crossed out in red.
16.2.3 WPS / PSK / Open connection
A WPS connection enables the radio to be connected to your network in a simple yet protected man-
ner. There are two options available. Establishing the connection through
PBC = Push-Button-Con-
figuration (configuration at the push of a button)
or by the PIN procedure, in which the web
interface of your router prompts you to enter a randomly generated sequence of numbers.
16.2.4 Setup using PBC
Select the desired network
"[WPS ...]"
. Then select the
"Press button"
option with
"WPS menu"
and confirm. Now press the WPS button on your router or access point (AP). Please refer to the oper
-
ating instructions of your router or AP for the exact procedure.
.
Alternatively, the process can also be
started in the
"Internet Settings"
menu under
"PBC WLAN Structure"
. Follow the instructions on
the display.
