Kenwood LS-X70, Инструкция по эксплуатации

Страница: 5 / 28

5
EN
ENGLISH
LS-X70 1261-00_00
7
Bi-wiring connection
This speaker is capable of bi-wiring connection, with which the woofer and midrange/tweeter units can be driven
independently. To connect each speaker in the bi-wiring connection, prepare two speaker wires (commercially available)
and connect them as shown below.
1
Remove the shorting plates.
2
Remove the shorting plates.
1
Loosen the four knobs.
Shorting plate
WHITE RED
R L FRONT A
-
+
BLUE GRAY
R L
SURROUND
-
+
3
Connect the speaker wires to the speaker output terminals of the amplifier.
• When using the speaker as the surround back speaker,
connect the speaker wire to the surround back speaker
output terminals.
Speaker terminals
(Amplifier or AV control center)
Wire with white line
To be continued.
Using as Front speakers
Left Right
Using as Surround speakers
Left Right
Wire with
white line