background image

3

 EN

ENGLISH

LS-X70  1261-00_00

Introduction

Thank you for selecting our speakers as part of your high-fidelity
system. We at KENWOOD are confident that your choice will bring
you years of rich listening pleasure. Please take the time to read
through this booklet carefully. It will help you to obtain the peak

performance for which the speakers were designed.

For your records

Record the serial number, found on the back of the unit, in the
spaces designated on the warranty card, and in the space pro-
vided below.
Refer to these model and serial numbers whenever you call upon
your KENWOOD dealer for information or service on this product.

LS-X70  Serial number

Installation Locations

Important Safeguards

Caution: Read this item carefully to keep your

safety.

1.

Suffocation

 – After taking the unit out of the polyethylene

bag, be sure to dispose of the polyethylene bag out of the
reach of children. Otherwise, they may play with the bag,
which could cause hazard of suffocation.

2.

Water and moisture

 – The appliance should not be used

near water - for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.

3.

Heat

 – Do not install the unit near a source of heat, such

as radiators, or under direct sunlight.

4.

Modification

 – Do not attempt to open or modify the unit,

for this could cause fire hazard or malfunction.

5.

Cleaning

 – Do not use volatile solvents such as alcohol,

paint thinner, gasoline, or benzine, etc. to clean the cabi-
net. Use a clean dry cloth.

6.

Abnormal smell

 – If an abnormal smell or smoke is de-

tected, immediately turn the power OFF and unplug the
appliance from the wall outlet. Contact your dealer or near-
est service center.

Left

speaker

Center speaker

Right

speaker

Right

Left

Surround speakers

Surround back
speaker

Subwoofer

Information on Disposal of Old Electrical and Electronic
Equipment (applicable for EU countries that have
adopted separate waste collection systems)

Products with the symbol (crossed-out wheeled bin)
cannot be disposed as household waste. Old elec-
trical and electronic equipment should be recycled
at a facility capable of handling these items and their
waste byproducts. Contact your local authority for
details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help con-
serve resources whilst preventing detrimental ef-
fects on our health and the environment.

Positioning For Optimal Surround Sound

Use this speaker system as the front, surround or surround
back speaker. Other speakers are to be purchased separately.

• Place the left and right speakers at each side of your TV.

Angle the speakers towards the listening area to enhance
the stereo effect.

• Place the center speaker on the center between the front

left and right speakers. Tilt the speaker upward or down-
ward so that it is directly facing the listening area.

• The subwoofer’s deep-bass reproduction characteristics are

richest when the subwoofer is installed in a corner or near a
wall.

• Place the surround speakers straight to or diagonally be-

hind the left and right of the listening position.

• Place the surround back speaker behind the listining posi-

tion, at the same height as the left and right surround speak-
ers.

About Using Speakers Near a TV

This speaker include magnetic shielding and can therefore be
installed close to a TV set. Note, however, that placing the
speaker  too close to a CRT type TV may in some cases pro-
duce distortion in the color reception. In such case, turn on the
TV and check that color reproduction is normal. If color is dis-
torted, turn the TV off for 15 to 30 minutes, then turn it back on
and check again. (This allows the TV’s degaussing circuitry to
correct for the magnetic field from the speakers.) If distortion
is still present, move the speakers further from the TV.

Installation

Place the speakers on the floor or other horizontal stable
surface.
Notes:

• Since a speaker is not fixed, be careful not to push down.
• Be careful not to hook a leg on a speaker wire.

Содержание LS-X70





























Отзывы: