![Kenwood KVT-526DVD Скачать руководство пользователя страница 90](http://html.mh-extra.com/html/kenwood/kvt-526dvd/kvt-526dvd_instruction-manual_189328090.webp)
90
KVT-526DVD/KVT-556DVD
Some functions of this unit may be disabled by
some settings made on this unit.
!
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
▲
Subwoofer is not set to On.
☞
<Audio Setup> (page 58)
▲
Preout is set to "Rear".
☞
<System Setup> (page 62)
▲
The Dual zone function is enabled.
☞
<Zone Control> (page 82)
!
Cannot set up the subwoofer phase.
▲
Subwoofer is not set to On.
☞
<Audio Setup> (page 58)
▲
Low pass filter is set to Through.
☞
<Crossover Network Setup> (page 59)
!
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear
speakers.
▲
The Dual zone function is disabled.
☞
<Zone Control> (page 82)
!
Cannot play audio files.
▲
"CD Read" of <System Setup> (page 62) is set
to "2".
!
Cannot Folder select.
▲
The Scan play or Random play function is
enabled.
!
Cannot perform Repeat play.
▲
The PBC function is enabled.
!
• Cannot set up the equalizer.
• Cannot set up the crossover network.
▲
The Dual zone function is enabled.
☞
<Zone Control> (page 82)
!
Cannot watch the source selected as AV-
O
UT
in the rear monitor.
▲
A source control screen is displayed in front.
☞
<AV lnterface Setup> (page 64)
▲
"AV-OUT Graphic Output" of <AV Interface
Setup> is set to "Black".
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
?
The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
☞
The Touch Sensor Tone can’t be output from
the preout jack.
Tuner source
?
Radio reception is poor.
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
✔
The antenna control wire is not connected.
☞
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
Disc source
?
The specified disc does not play, but another
one plays instead.
✔
The specified disc is quite dirty.
☞
Clean the disc.
✔
The disc is severely scratched.
☞
Try another disc instead.
Audio file source
?
The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 4).
✔
The recording condition is bad.
☞
Record the media again or use another
media.
Help?
Troubleshooting
B64-4551-00̲00̲E̲en.indd 90
B64-4551-00̲00̲E̲en.indd 90
09.10.27 5:14:08 PM
09.10.27 5:14:08 PM